RADWIN 5000 JET is a disruptive point-to-multipoint solution incorporating a smart beamforming antenna and advanced air interface. JET’s antenna beam cancels radio interference and enables operation in heavily congested unlicensed bands and in non-line-of-sight (NLOS) conditions, delivering the highest actual capacity for longer range than any other point-to-multipoint system in the industry.

JET’s smart beamforming antenna, combined with its innovative air-interface and TDD-network synchronization, boost frequency reuse to new levels. JET addresses the need for high network throughput, while drastically reducing the amount of frequency spectrum needed for deployments. This positions JET as the ideal wireless broadband access solution for deployments in the 3.x GHz licensed bands in greenfield areas and as an ideal replacement for WiMAX networks.

Download RADWIN's WiMAX replacement white paper⇒

RADWIN 5000 JET is the next generation of RADWIN 5000 point-to-multipoint solutions and is backward compatible with the existing RADWIN 5000 install base.

RADWIN 5000 JET Highlights:

  • Base station with smart beamforming antenna
  • Up to 750 Mbps per sector, 3 Gbps per cell using 2 x 80MHz
  • Variety of subscriber units:
    • High capacity - 10, 25, 50 Mbps, upgradeable to 100 Mbps
    • Ultra capacity - 100 and 250 Mbps
  • Long range – 40 Km / 25 miles
  • Interference cancellation due to directional narrow beam antenna
  • Dynamic channel bandwidth selection optimized per channel conditions
  • Guaranteed SLA per subscriber unit
  • Multiband radio – 3.3 - 3.8 / 3.65 GHz or 4.9-5.8 GHz in the same unit
  • Small form factor, IP67 units
  • Seamless operation in nLOS/NLOS and severe multipath conditions
  • Fixed and nomadic capabilities
  • TDD radio synchronization for greater network capacity

Customer Quotes

“Hands down, RADWIN 5000 JET technology is superior to anything we’ve worked with in the past. With RADWIN, we're able to meet the current and future connectivity needs of the rural homes and businesses in the communities we serve.”
John E. Koller, General Manager, ATC Communications, Nebraska, US

“With RADWIN’s JET Point-to-MultiPoint solutions we’re delivering even higher quality services to our customers with unprecedented bandwidth.”
Piotr Sieluk, CEO, BENESTRA

"I am constantly amazed at the interference mitigation capabilities of the JET platform, which allows us to operate cleanly in extreme noise environments."
Don McCorkle, IS Engineer, ATC Communications, Nebraska, US

"The beamforming feature in RADWIN 5000 JET reduces installation & maintenance costs, with no initial alignment and no realignment."
Xavier Le Polozec, France


  • High interference immunity, similar to point-to-point
  • Highest actual sector capacity:

  • Optimized frequency reuse - greater network capacity per given spectrum
  • Simplified network planning
  • Full span of asymmetric traffic
  • Highest security level
  • Optimal network capacity in dense deployments (due to radio synchronization)
  • Seamless network capacity upgrade of RADWIN 5000 install base

To learn more about the RADWIN 5000 JET point to multipoint solution, contact us today.

Key Features

  • Variety of MIMO subscriber units – 10, 25, 50 Mbps
  • Pay as you grow up capacity of up to 100 Mbps
  • Small form factor, low visual impact
  • Compatible with RADWIN 5000 install base and coexists with RADWIN 2000 PtP portfolio
  • Single radio supporting 3.3-3.8 / 3.65 GHz or 4.9-5.8 GHz

To learn more about the RADWIN 5000 JET point to multipoint solution, contact us today.


  • High capacity last mile enterprise connectivity
  • Backhaul for wireless and landline access systems such as Wi-Fi hot spots, cellular base stations and DSLAMs
  • Connectivity for high resolution video surveillance

To learn more about the RADWIN 5000 JET point to multipoint solution, contact us today.